Caple CR9215 - Manual (Page 43)

Assembly and dismantling
of the side runner frames
– Fit the side runner frames into the
holes on the side walls inside the
oven (Fig. 8.8).
– Slide the tray and rack into the run-
ners (Fig. 8.9).
– The rack must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven.
– To dismantle, operate in reverse
order.
Fig. 8.8
Fig. 8.9
Inside of ovens
The oven should always be cleaned
after use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with
the manufacturers recommendations
and testing a small sample of the oven
cavity.
Abrasive cleaning agents or scouring
pads/cloths should not be used on the
cavity surface.
• NOTE: The manufacturers of this
appliance will accept no responsibili-
ty for damage caused by chemical or
abrasive cleaning.
Attention: Do not store flammable
material in the ovens.
Let the oven cool down and pay
special attention no to touch the hot
heating elements inside the oven
cavity.
43