Setting, Auto, During cooking – Caple C240SS User Manual
Page 29: At the end of cooking, Press pushbutton 2, Starts to flash and, Appears, On the display, Becomes steady and the cooking programme starts, Appears on the display
25
Setting
1.
Set the cooking function by turning the oven selector
to the function required.
2.
The cooking temperature appears on the display. To
change it proceed as described in the Setting the
cooking chapter
3.
Press pushbutton 2.
AUTO
starts to flash and
0.00
appears.
4.
Press pushbuttons 5 or 6 to set the cooking time
(cooking time in hours and minutes: set it to ten minu-
tes less than the time required because the stored
heat will complete the cooking).
5.
On the display
AUTO
becomes steady and the
cooking programme starts.
During cooking
6.
During the cooking cycle, the display shows the oven
temperature measured by the probe.
Press key 2 to display the time remaining until the end
of cooking.
The cooking time and temperature can be varied at
any time, as described above.
At the end of cooking
7.
End
appears on the display,
AUTO
flashes and the
audible signal sounds.
The cooking cycle has finished and the oven is OFF.
8.
Press any programmer pushbutton to stop the audible
signal.
9.
OFF
appears (oven OFF).
10.
Turn the function selector to
0
(oven OFF).
11.
The programmer display shows the time.
Note: At the end of the programme always turn the
function selector knob to 0 (oven OFF).
I
I I I
I
I
I
II
I
I
SEMI-AUTOMATIC COOKING
Start immediate cooking or switch the oven off automatically after the program-
med cooking time.
0
F
°
C
P
P
2
5
6
I
I I I
I
I
I
II
I
I
I
I
I I
I
I
I
I
I
I
I
I
I