1 configuration – Comtech EF Data KST-2000A/B User Manual
Page 90
Ku-Band Satellite Transceiver
Revision 9
Operation
MN/KST2000AB.IOM
5–6
5.3.1
Configuration
Terminal configuration may be viewed or changed by entering the CONFIG menu
(below) from the SELECT menu on the front panel.
Enter the selected configuration menu by pressing [ENTER]. Press [
W
] or [
X
] to view
the selected configuration parameters. To change a configuration parameter, press
[ENTER] to begin the change process, at which point the arrow keys can be used to make
the changes.
After the changes are made and the display represents the correct parameters, execute the
change by pressing [ENTER]. When [ENTER] is pressed, the necessary programming is
initiated by the KST-2000A/B.
To undo a parameter change prior to executing it, simply press [CLEAR].
Figure 5- 5. Configuration Menu