DFI KS210-IMX6 Manual - Manual (Page 8)

www.dfi .com
8
Chapter 1 Introduction
Getting to Know the KS210-IMX6
Chapter 1
Side View
Speakers
It is built-in with 2 1W speakers on the left and right sides of the system.
Top View
Bottom View
2 built-in 1W speakers
SD COM
COM Port
Used to connect a serial device.
SD
Used to insert a SD card.
Power Switch
Line-out/Mic-in
USB
DC-in
HDMI
COM 8-bit GPIO USB Client
LAN
COM Port
Used to connect a serial device.
USB Ports
Used to connect USB 2.0/1.1 devices.
USB Client Port
Used to connect a USB device operating as a client port.
HDMI Port
Use to connect a HDMI device.
LAN Port
Used to connect the system to a local area network.
8-bit GPIO
Supports 8-bit GPIO 7-pole terminal block (4-bit in/ 4-bit out).
Line-out/Mic-in
Used to connect to a speaker or to an external microphone.
DC-in
Used to plug a power adapter.