DFI EC300 Series - Manual (Page 125)

125
7
BIOS Setup
SATA Confi guration
This section is used to confi gure SATA functions.
Enable or disable SATA
Device.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SATA Controller(s)
SATA Mode Selection
SATA Test Mode
Serial ATA Port 0
Software Preserve
Serial ATA Port 1
Software Preserve
Advanced
SATA Controller(s)
This fi eld is used to enable or disable the Serial ATA channels.
SATA Mode Selection
IDE Mode
This option confi gures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Con-
troller Interface).
RAID Mode
This option allows you to create RAID or Intel Matrix Storage confi guration on
Serial ATA devices.
SATA Test Mode
This fi eld is used to enable or disable the Serial ATA test mode.
[Enabled]
[IDE]
[Disabled]
Empty
Unknown
Empty
Unknown
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit