DFI NP905-B16C - Manual (Page 59)

59
3
BIOS Setup
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the “Suspend
Mode” field is activated.
Min Saving Minimum power saving time for Suspend mode = 1
hr.
Max Saving Maximum power saving time for Suspend mode =
1 min.
User Define Allows you to set the power saving time in the
“Suspend Mode” field.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This will cause the system to turn off the ver-
tical and horizontal synchronization ports and
write blanks to the video buffer.
Blank Screen This only writes blanks to the video buffer.
DPMS Support Initializes display power management signaling. Se-
lect this if your video board supports it.
Video Off In Suspend
This field is used to activate the video off feature when the system
enters the Suspend mode.
Suspend Type
The options are Stop Grant and PwrOn Suspend.
MODEM Use IRQ
This field is used to set an IRQ channel for the modem installed in
your system.
Suspend Mode
When the system enters the Suspend mode, the CPU and onboard
peripherals will be shut off.