DFI NP905-B16C - Manual (Page 98)

98
4
Supported Software
Creating an AHCI Driver Floppy Diskette under Vista
The system board package includes floppy diskettes which are needed
when you install the AHCI driver during Windows Vista installation. If in
any case you lost the diskette, you can create another one by following
the steps below.
1. Insert the provided CD into a CD-ROM drive.
2. The execution files are located in:
drive:>\AHCI_RAID\F6FLOPPY
3. Run f6flpy32.exe (for 32-bit system) or f6flpy64.exe (for 64-bit sys-
tem).
4. Insert a blank floppy diskette then click OK.
5. The system will format and write the necessary driver files into the
diskette.