Chapter 4 – DFI CR900-B User Manual

Page 36

Advertising
background image

www.dfi .com

Chapter 4 BIOS Setup

36

Chapter 4

PC Health Status

This section displays hardware health monitor.

CPU Configuration

This section is used to configure the CPU. It will also display the detected CPU

information.

Hyper-threading

Enable this field for Windows XP and Linux which are optimized for Hyper-Threading

technology. Select disabled for other OSes not optimized for Hyper-Threading tech-

nology. When disabled, only one thread per enabled core is enabled.

Active Process Core

Number of cores to enable in each processor package

Limit CUPID Maximum

The CPUID instruction of some newer CPUs will return a value greater than 3.

The default is Disabled because this problem does not exist in the Windows series

operating systems. If you are using an operating system other than Windows, this

problem may occur. To avoid this problem, enable this field to limit the return value

to 3 or less than 3

.

Intel Virtualization Technology

When this field is set to Enabled, the VMM can utilize the additional hardware capa-

bilities provided by Vanderpool Technology.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

System Hardware Monitor

CPU Smart Fan

CPU Temperature
CPU FAN Speed
VCore
Vgfx
DDR
+1.05V
CPU

VCCSA

Advanced

[Enabled]

: +49 C
: 4968 RPM
: +0.912 V
: +1.023 V
: +1.524 V
: +1.052 V
: +0.797 V



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Enable/ Disable CPU
SmartFan

Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

CPU Confi guration

Intel (R) Core (TM) i7-3610QE CPU @ 2.30GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-X Technology
Intel SMX Technology
64 bit

L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache

Hyper-threading

Active Process Core
Limit CUPID Maximum
Intel Virtualization Technology

Advanced

306a8
C
2300 MHz
1200 MHz
2300 MHz
4
Supported
Supported
Supported
Supported

32 kB x4
32 kB x4
256 kB x4
6144 kB

[Enabled]

[All]
[Disabled]
[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Advertising