Chapter 4 – DFI CR900-B User Manual

Page 37

Advertising
background image

www.dfi .com

Chapter 4 BIOS Setup

37

Chapter 4

SATA Configuration

This section is used to configure SATA functions.

SATA Controller(s)

This field is used to enable or disable the Serial ATA channels.

SATA Mode Selection

IDE Mode

This option configures the Serial ATA drives as Parallel ATA storage devices.

AHCI Mode

This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-

face).

RAID Mode

This option allows you to create RAID or Intel Matrix Storage configuration on Serial ATA

devices.

Intel TXT (LT) Configuration

This section is used to configure the Intel Trusted Execution technology.

Intel TXT(LT) Support

The options are Enabled and Disabled (Default).

Enable or disable SATA
Device.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

SATA Controllers
SATA Mode Selection
SATA Test Mode
Aggresive LPM Support
SATA Controller Speed

Serial ATA Port 0
Software Preserve

Port 0

Hot Plug
External SATA
SATA Device Type
Spin Up Device

Serial ATA Port 1
Software Preserve

Port 1
Hot Plug
External SATA
SATA Device Type
Spin Up Device

Serial ATA Port 2
Software Preserve

Port 2

Hot Plug
External SATA
Spin Up Device

Serial ATA Port 3
Software Preserve

Port 3

Hot Plug
External SATA
Spin Up Device

Serial ATA Port 4
Software Preserve

Port 4

Hot Plug
External SATA
Spin Up Device

Advanced

[Enabled]
[AHCI]
[Disabled
[Enabled]
[Gen3]

Maxtor 6U160M0 (163.9
Not Supported

[Enabled]
[Disabled]
[Disabled]
[Hard Disk Driver]
[Disabled]

Empty
Unknown

[Enabled]
[Disabled]
[Disabled]
[Hard Disk Driver]
[Disabled]

ATAPI iHAS32 ATAPI
N/A

[Enabled]
[Disabled]
[Disabled]
[Disabled]

Empty
Unknown

[Enabled]
[Disabled]
[Disabled]
[Disabled]

GLS85LS1004P (4.0GB
Supported

[Enabled]
[Disabled]
[Disabled]
[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

Intel Trusted Execution Technology Confi guration

Intel TXT support only can be enabled/disabled if SMX is
enabled. VT and VT-d support must also be enabled prior to TXT.

Secure Mode Extension (SMX)

Intel TXT(LT) Support

Advanced

Enabled

[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

SATA Controller Speed

It indicates the maximun speed which the SATA controller can support.

Advertising