Digi-Star ICP 300 - Manual (Page 3)

ICP 300 IN-CAB PRINTER
3
1. Introduction
Figure 1
The RDS ICP 300 In-Cab printer is an ultra-compact thermal printer designed
for easy paper loading. It accepts 58mm wide rolls up to 44mm dia.
The printer is connected to and powered from the instrument via a custom
cable with RJ-12 connector, and operates with a supply voltage in the range
10-35V dc.
No maintenance is required, except to occasionally clean the rubber paper
roller to remove any dirt buildup.
2. Operation
When installed with a Wizard instrument the printer is normally powered on
as the vehicle is started.
When installed with a Pro-Series/Psi instrument the printer is powered on
when the instrument is switched on.
The status LED illuminates and the printer mechanism is reset.
Pressing the button advances the paper.