Digi-Star ICP 300 - Manual (Page 7)

ICP 300 IN-CAB PRINTER
7
3. Installation - RDS Instruments
3.1 Connection - RDS 'Wizard','G-Wiz', 'G-CAN', 'ISOCAN'
(Printer cable Pt No. S/CB/167-4-005)
These instruments all utilise variants of the 'Terminator' junction box for
RS232 serial connections.
A 4-way IDC header is the standard connection for the ICP300 printer (fig. 5).
IDC Connections:
Pin Wire Colour Function
1 White +V Supply (10-35V)
2 Red CST (from printer
3 Green Rx (To printer)
4 Blue ground
1. Plug the printer cable (RJ-12) into the back of the printer.
2. Plug the printer cable in the terminal box as shown (using a cable-tie for
strain relief).
Figure 5