Digi-Star ICP 300 - Manual (Page 6)

ICP 300 IN-CAB PRINTER
6
2.4 Maintenance
Occasionally, it may be necessary to clean dust or foreign matter from the
paper compartment. Wipe the paper compartment clean using a dry soft
cloth only.
The rubber roller can be removed for cleaning if necessary. Push the roller
forwards at each end to disengage it from the slots (figure 4).
NOTE: DO NOT angle the roller too far with one end still engaged as this may break
the moulding.
DO NOT touch or attempt to clean the print head.
Figure 4: Remove paper roller
2.5 Service
There are no servicable parts. In the event of damage or failure, the printer is
replaceable only as a complete unit.