Digi-Star ICP 300 - Manual (Page 4)

ICP 300 IN-CAB PRINTER
4
2.1
Power-On Self-Test
Press and hold the button and then power up the instrument. The
printer will then print a self-test report.
The self-test procedure checks most of the printer functions except for the
serial interface
2.2 Status LED
If there is a problem with the printer, the status LED will indicate a fault
condition by a flashing sequence as follows.
LED Indication Condition Solution
On Normal -
Off No Power -
* * * Paper Out Fit new paper
** ** ** Print head too hot Allow head to cool
*** *** *** Power below 10V dc Check supply +V