Digi-Star EZ4300 - Manual (Page 12)

EZ 4300
8
Line 1
The feeding number:
The number of rotations during this ingredient: (RC option only)
The ingredient name:
Line 2
The zone number:
The name of the recipe:
The call weight of this ingredient:
Line 3
The gross weight:
Instruction data:
When the ingredient and call weight is being displayed, start loading the
ingredient.
The ingredient call weight will begin counting down towards zero.
As the weight approaches zero, the alarm light and buzzer will begin to sound.
Once you have reached the preset weight, you have two options to advance the
ingredient:
Manual Advance: Press [Advance] or [Enter] to advance to next ingredient.
Automatic Advance: Weight reaches the tolerance percentage and the timer
runs out.
Note: For more information on how to setup the automatic mode refer to page:14
If the format is in “Complete Loads Mode” the pen unloading sequence will follow
the recipe loading. Do not press the [Pens] key to start pen unloading.
Pen Unloading
There are two modes for pen unloading “Complete Loads Mode” and “Recipe and
Pens List Mode”.
Complete Loads Mode
Once the ingredients have been loaded, the scale will display: START
DELIVERIES - 15000 LOADED
When the message is done displaying the scale will display the first pen to
unload.