Digi-Star EZ4300 - Manual (Page 16)

EZ 4300
12
Go Back to a Skipped Ingredient
If the indicator accidentally skips an ingredient:
Press the [ ] arrow key to move back to the ingredient.
Press [Enter].
Note: If the ingredient weight changed more than 40 lbs. you cannot restart that
ingredient.
Change Feeding Number
To change feeding number:
Press the [ID] key.
Enter your user ID number.
Press the [ID] key.
Enter the feeding number (0-9).
Press the [ID] key.
The scale will return to normal weighing mode.
Use the Arrow Keys
Use the Arrow Keys in Recipe or Pens List
The up [ ] and down [ ] arrows will move the list one line of information at a
time.
Using the right [ ] and left [ ] arrows will move the list three lines of
information at a time.
Use the Arrow Keys to Select Ingredients or Pens
While you are in a loading or unloading sequence:
Press [ ] to locate the ingredient or pen required
Press [Enter] to start.
Clear the EZ4300 Memory
To clear the EZ4300 memory:
The unit must be powered off,
Press and hold [Clear]. Press [On], and continue holding the clear key until
the E4300 displays: “ " " ”. Then release the clear key
Press [On] to erase the feeding memory. The scale will then continue to
power up as normal.