Digi-Star EZ4300 - Manual (Page 8)

EZ 4300
4
Serial Port
The serial port if installed can be used to communicate with computers and other
digital input/output devices.
Remote Display
The remote port outputs data to an optional remote display models RD2000,
RD2000V and RD400. Connect cable from remote display directly to this port.
DataKey
The DataKey port accepts the DataKey memory device. Information can easily
be transmitted between a PC and the EZ4300 using the DataKey.
Operation
Turning on the scale
Press [ON].
After the “ ” message is displayed:
Enter a user ID, and then press the [ID] key.
Enter a feeding number, and then press the [ID] key.
The scale enters the gross weighing mode. Gross mode displays the weight
change since the unit was last zero/balanced.
Zero Balance the Scale
Press [Net/Gross] and within three seconds, press the [Zero] key.
“ ” is displayed to show completion of the step and the scale is put in the gross
mode.
Transfer Data to the 4300
Datakey Mode
While the scale is in the gross weighing mode, install the Datakey.
Press [ON] to upload the data from the Datakey.
The scale will display the number of records to be transferred.