Digi-Star Stockweigh 300 - Manual (Page 16)

Weighing Errors
12 SW300 User’s Manual D3734-US REV E
WEIGHING ERRORS
Over Capacity Limit (
OVRCAP
)

Weight on scale exceeds capacity limit. Capacity value is entered in
SETUP to warn of overloading.
Over Range (+RANGE )

The display shows message "+RANGE" if weight on scale system
exceeds maximum weight measurable by scale system.
Under Range (-RANGE )

Display shows message "-RANGE" if weight on scale system is less
than minimum weight measurable by scale system.
RUN SELF TEST
Displays diagnostic tests to aid in troubleshooting.

Shows battery level

Shows load cell setup

Tests display segments

Shows program ID

Allows key test
1. Press and within three
seconds press to start self
test.
2. Press to exit test.
1 2