Digi-Star Stockweigh 300 - Manual (Page 19)

Menus and Calibration
D3734-US Rev E SW300 User’s Manual 15
Calibrating Scale Using
Known Weights
1. Press and hold and
at the same time to enter setup
menu.
2. Press repeatedly to scroll
down to
OTHER
and press .
3. Press to zero balance the
scale.
4. Then press .
5. Add a known weight and press
.
6. Change displayed weight by
pressing to change value of
"flashing" digit and press
key to select which digit of display
is flashing.
7. When display reads correct
weight, press to store
calibration value.
8. Press and hold
9. Press repeatedly to scroll
down to CAP (capacity).
10. Enter maximum expected weight
or continue to press until
default weigh screen displays.
1
2
cal
3
4
1
2
5
6
7