Digi-Star SW4600EID - Manual (Page 32)

SW4600EID
EID READER – OPTIONAL
Notes: Indicator connects to Allflex™ ISO Compatible RFID Stick
Readers only. Do not attempt to use with other RFID readers or
peripherals not approved by Digi-Star. DAMAGE MAY OCCUR.
Allfex™ Stick Reader reconfigures output format if button depressed while
powering “ON”. Don’t lay stick reader with button down while applying
power.
Depending on model, Allflex™ Stick Reader gets its power from “EID
Reader” port or internal battery.
If problem with Allflex™ RFID Stick Reader or number of characters it is
transmitting, follow next procedure to re-configure stick reader to TIRIS
S2000 output format. Refer to Allflex
™
RFID Stick Reader manual for
details.
32 D3740