Digi-Star SW4600EID - Manual (Page 33)

Operators Manual
Re-Configuring Allflex Stick Reader
1. Press .
2. Connect Stick Reader to EID
Reader port.
3. Press and hold “READ” button on
Stick Reader while pressing
4. After 2 seconds, Stick Reader
responds with 6 flashes and 6
beeps. Release “READ” button.
5. Press to start self-test.
Indicator scrolls
“Enter “ON” to
continue or Press “ENTER to
reset EID READER”
, press
to re-configure Stick Reader to
TIRIS 2000 output format.
6. Re-configure successful, indicator
displays “ GOOD”. Indicator displays
“ ERROR”, try procedure again.
Contact Digi-Star Technical Service if problems persist.
g oo d
Press help for more
information
1
2
3
5
4
6
5
D3740 33