Flowserve Desuperheaters - Manual (Page 19)

19
Desuperheaters FCD VLENIM0115-00 – 09/11
flowserve.com
6. Inspect manifold for wear, leaks, or cracks. Replace or repair if necessary.
7. Install the nozzle onto the nozzle seat retainer. Tighten 1 to 3 turns beyond finger tight.
8. With similar weld metal (usually 316 SS), tack weld the nozzle onto the nozzle seat retainer.
9. Install new gaskets in the nozzle housing. Install the nozzle seat retainer with nozzle into nozzle
housing. Install nozzle housing cap flange and cap flange bolting. Torque cap flange bolting to
values listed in Table 6.