Flowserve Desuperheaters - Manual (Page 20)

flowserve.com
To find your local Flowserve representative:
For more information about Flowserve Corporation, visit
www.flowserve.com or call USA 1 800 225 6989
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended
function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide
variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The
purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user
should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve
products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as
a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this
product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice.
Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.
© 2011 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
FCD VLENIM0115-00 09/11 Printed in USA.
Flowserve Corporation
Flow Control
Flowserve America
1350 N. Mt. Springs Pkwy.
Springville, UT 84663 USA
Telephone: +1 801 489 8611
Fax: +1 801 489 3719
Flowserve EMA
Kasernengasse 6
Villach Austria 9500
Telephone: +43 (0) 4242 41181 0
Fax: +43 (0) 4242 41181 50
Flowserve S.r.L FCD Italy
Via Prealpi 30/32
20032 Cormano (MI)
Tel. +39 (0)2 66325.1
Fax +39 (0)2 66325560