Flowserve LRR1-40 TDS Control Unit - Manual (Page 6)

6
Important Notes
Usage for the intended purpose
Use blowdown controller LRR 1-40 only in conjunction with conductivity electrode
LRG 16- 40 and an operating & display unit type URB or SPECTOR
control for detecting
and monitoring electrical conductivity in liquids.
Note that the application of the control unit LRR 1- 40 for conductivity limiting purposes or
continuous boiler blowdown is only permissible if it is used in conjunction with the
conductivity electrode LRG 16- 40 and an operating & display unit type URB or
SPECTOR
control .
To guarantee a trouble-free operation observe the requirements made on water quality
as specified in the pertinent TRD and EN regulations.
Any type of use differing from the usage described above must be considered as
improper. The resulting risk will have to be borne by the user alone. The manufacturer
hereby expressly rejects any claims for any damage resulting from improper usage.
S afety note
The equipment must only be installed and commissioned by qualified and competent
staff.
Retrofitting and maintenance work must only be performed by qualified staff who -
through adequate training - have achieved a recognised level of competence.
For installation, removal, commissioning, operation and maintenance, every person who
works with the equipment must have read and understood the complete installation
manual. Furthermore, responsibilities must have been defined clearly and
unambiguously and must be adhered to.
Usage of the equipment for the intended purpose includes compliance with the rules and
notes in these installation instructions for installation, removal, commissioning, operation
and maintenance.
The operating company must ensure that, whenever the equipment is being operated, it
is in perfect condition.
Working methods that jeopardise safety must not be used!