Foxconn nT-330i - Manual (Page 38)

32
5
1.2. System Recovery from the USB or DVD disk
1.2.1. Power on the computer, connect the recovery USB or insert the recovery DVD into DVD
driver. When the prompt message appears on the screen, press “F11” to enter Boot Menu and
set USB(Removable Device) or DVD as the first boot device. Computer will continue to boot up.
1.2.2. When the following picture shows, select "Install and make recovery partition" and click “Next”
to install system and make a recovery partition in the hard disk. This recovery partition will
provide “ A key to Resume” function which is very convenient for users. If you select "Install
system only", there will be no “ A key to Resume” function.
1.2.3. A warning message will show as below. Click "Next" to continue.
■ Usually the recovery partition will occupy about 5GB of the hard disk.
C
AU
TI
O
N !