Foxconn R10-H1 - Manual (Page 12)

5
1
1-3 back Panel Connectors
1. PS/2 Keyboard Port
Use the upper port (purple) to connect a PS/2 Keyboard.
2. USb Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
3. DVI-I Port
The DVI-I port supports DVI-I specification. Connect a monitor that supports VGA or DVI-D
connection to this port.
4. HDMI Port
The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface
to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI
audio/video device to this port. The HDMI Technology can support a maximum resolution of
1920x1080p but the actual resolutions supported depend on the monitor being used.
5. e-SATA Port
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to
the chassis back panel. External SATA device shall provide power by its own.
6. Audio Ports
For the definition of each audio port, please refer to the table below :
DVI-I Port LAN Port
USB Ports
PS/2 Keyboard Port
HDMI Port Audio Ports
Line Out
Microphone In
Subwoofer
Rear Speaker
Side Speaker
Line In
7 1 3
5 2 6 2 4
E-SATA Port
2
Port 2-channel
4-channel 5.1-channel
7.1-channel
Blue Line In Line In Line In Line In
Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Microphone In Microphone In
Orange - - Center/Subwoofer Out Center/Subwoofer Out
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Grey - - - Side Speaker Out