Foxconn R10-H1 - Manual (Page 32)

25
3
► CPU C6 report
This item is used to enable or disable CPU C6(ACPI C3) report to OS.
► Package C State limit
This item is used to set the Package C State limit. Option value: C0, C1, C6, C7, No Limit.
Performance Tuning
► EIST
You can enable/disable the EIST (Processor Power Management, PPM) through this item.
► Turbo Mode
This item is used to enable or disable Turbo Mode.
► 1/2/3/4-Core Ratio Limit
These items display the limit for core active. 0 means using the factory-configured value.
EIST [Enabled]
Turbo Mode [Enabled]
1-Core Ratio Limit 38
2-Core Ratio Limit 37
3-Core Ratio Limit 36
4-Core Ratio Limit 35
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced Advanced
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enhanced Intel SpeedStep
Technology
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased average
power consumption and decreased average heat production. There are some system
requirements must be met, including CPU, chipset, motherboard, BIOS and operation
system. Please refer to Intel website for more information. C
A
U
T
IO
N
!