Foxconn R10-H1 - Manual (Page 71)

64
4
3-3 Configure - Advance
This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot
Block, it means BIOS is not protective, and you must make sure the flash process is continuous
and without any interruption.
4. About & Help
This page shows some information about FOX LiveUpdate.
Click here
Select which BIOS ROM
to flash(Only available to
motherboard with backup
BIOS ROM )
Apply the changes Reset to default value
Select to flash Boot Block
Select to clear CMOS
Click here
Show information about
FOX LiveUpdate
We recommend that you had better keep the default setting unchanged to avoid any
damage.
C
A
U
T
IO
N
!