Remote commands – GAI-Tronics 10959-101 Wall-Mount Audio Messenger Interface (AMI) User Manual

Page 29

Advertising
background image

Pub. 42004-398E

M

ODEL

10959-10

X

W

ALL

-M

OUNT

A

UDIO

M

ESSENGER

I

NTERFACE

P

AGE

27 of 31

f:\standard ioms - current release\42004 instr. manuals\42004-398e.doc
10/09

Remote Commands

After a call has been connected to the AMI, the caller can enter a valid remote command using the DTMF
keypad of the telephone. During the greeting message, the caller must enter a DTMF “*” to access
remote control. The greeting message will be halted, and two consecutive beeps will sound, indicating
the unit has entered remote control mode.

After entering remote control mode, callers can direct a page to a specific zone group by entering a
DTMF “#”, followed by the two-digit zone group number. Valid zone group numbers are 01–60.
Entering #00 selects the all-call feature.

Additional remote commands are available for wall-mount AMI units equipped with the 33-ohm
Page/Party

®

Interface. Callers can choose the party line that will be connected for a subsequent telephone

conversation. After entering remote control mode, the caller enters a DTMF “*”, followed by the single-
digit party line (1–5). The AMI will continue with live page or recorded paging, depending upon the
configured page mode. When the page is answered, the caller is connected to the selected party line.

The Off-hook Timeout setting for the Telephone Interface in the ACT tool limits the duration of a party
conversation. Approximately 20 seconds prior to the configured timeout expiration, the AMI will emit a
warning tone, indicating that the connected call is about to be terminated. If the caller enters the DTMF
“*” key, the AMI extends the conversation by the length of time defined by the Off-hook Timeout
parameter. Two consecutive beeps are sounded when the AMI timeout has been successfully extended.

While a caller is waiting for the paged party to respond, entering the DMTF “#” causes the AMI to restart
paging. Callers can either reissue a page for the original party, or make a page for another party.

N

OTE

: The caller does not access remote control mode to extend the connected party conversation or to

reissue a page.

Advertising