GAI-Tronics CommandPLUS Series Desktop Console Installation and Service Manual - Manual (Page 24)

Installation CommandPLUS Series Desktop Console Installation and Service Manual
12/10 20
XFS002A Footswitch
This accessory, which provides both hands-free PTT and monitor functions, is provided with a cable
fitted with a keyed connector containing three contacts. This connector mates with P7 on the back of the
console. Table 8 defines the function of each pin.
Table 8. Footswitch – 3-Pin Connector
Pin No. Pin Function
1 PTT
2 GND
3 Monitor
NOTE
If the desk mic or footswitch is connected after the console has been powered up, the console must be
powered down and powered up again. This allows the console to read the polarity of the monitor switch.
DO NOT press the monitor switch while the console is powering up, or the polarity will be read
incorrectly.