HiTi P910L User Manual - Manual (Page 6)

Chapter 1. Important Safety Instruction
3
Warning: In case you drop the printer, firstly turn off the power of the
printer and remove the power cable, then contact the dealers or service center. To
use the printer without any checking, can cause the fire or electric shock.
Warning: This product must be grounded, and always used with only the
specified power cable or the power cable accompanying this product.
If the product is used without ground, and current leakage occurs, fire or electrical
shock is most likely to result, and also cause signal-receiving interference to a radio,
a television receiver, and other similar electric appliances.
If the proper grounding connection is not possible, please contact to the dealers or
service center.
Warning: Secure the power cable firmly.
Warning: Do not attempt to service the printer beyond the instruction
specified in this document. In case, impossible to recover from the problem, please
contact to the dealers or service center.
Warning: The thermal head reaches high temperature during operation
but this is normal. Do not touch the thermal head.
Warning: Do not dismantle or remodel the printer. Some sections of the
printer contain a high voltage or become very hot. Ignoring this warning may cause
electric shock, fire, or burns.
Attention: Touching the surface of the thermal directly can cause the damage to
thermal head. When a hard object get into the printer, it can cause the damage to the
printer mechanism. In such case, please do not use the printer.
Attention: At installation, appropriate interface cable will be required with your
computer.