Hoist Fitness Mi6 - Manual (Page 14)

OWNER’S MANUAL
PAGE 13 Mi6 ASSEMBLY
NOTE:
LIFT THE RING ON THE PULLEY
COVER ASSEMBLY WHILE
PULLING IT UP AND OUT OF THE
COLUMN
NOTE:
LIFT THE PULLEY HOUSING
ASSEMBLY SLOWLY OUT
OF THE COLUMN, SO THAT
THE BEARINGS ON EACH SIDE
STAY IN THEIR ASSEMBLED
POSITION
NOTE:
- REPEAT STEPS FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
STEP 2
REMOVE THE PULLEY HOUSING ASSEMBLY
(21) FROM THE COLUMN (30) AS SHOWN.
ENSURE THE BEARINGS STAY ASSEMBLED
ON THE PULLEY HOUSING.
FRAME ASSEMBLY
STEP 1
REMOVE THE BOLT (78) AND BUMPER (42)
FROM THE COLLUMN (30)
NOTE:
ENSURE THAT THE COLUMN
IS RIGHT SIDE UP, WITH THE
NUMBERS ASCENDING
UPWARDS