Hoist Fitness Mi6 - Manual (Page 39)

OWNER’S MANUAL
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
Mi6 ASSEMBLY PAGE 38
FRAME ASSEMBLY
STEP 1
STEP 2
NOTE:
ADJUST THE HANGER (36) SO THAT IT POINTS
UPWARDS. WHEN FULLY INSERTED,
THE VISIBLE PORTION OF THE HANGER
WILL EXTEND 2” FROM THE SHEILD (SEE BELOW).
THIS ENSURES THAT THE SET SCREW (57) IS
TIGHTENED INTO THE FLAT SPOT ON
THE HANGER.
FLAT SPOT
2.00” [50.8]