Hoist Fitness Mi6 - Manual (Page 26)

NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
OWNER’S MANUAL
FRAME ASSEMBLY
PAGE 25 Mi6 ASSEMBLY
NOTE:
WRENCH TIGHTEN PULLEY BOLT (1)
INTO PULLEY CARRIAGE (11).
WRENCH TIGHTEN JAM NUT
SO IT IS TIGHT AGAINST BOTH THE
PULLEY CARRIAGE AND THE PULLEY BOLT.
WARNING
CABLE BOLT (1) MUST BE
THREADED A MINIMUM OF
3/8” WITH JAM NUT (1)
TIGHTENED SECURELY TO
ENSURE PROPER CONNECTION.
JAM NUT
PULLEY BOLT PULLEY CARRIAGE