Hoist Fitness Mi6 - Manual (Page 35)

NOTE:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLES AND PULLEYS
AT THE SAME TIME.
- REPEAT ASSEMBLY FOR
OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY
OWNER’S MANUAL
WARNING
CABLE BOLT (15) MUST BE
THREADED A MINIMUM OF
3/8” WITH JAM NUT (58)
TIGHTENED SECURELY TO
ENSURE PROPER CONNECTION.
NOTE:
LOOSEN JAM NUTS (58) AND
THREAD PULLEY MOUNT IN/OUT TO
GIVE THE CABLE PROPER TENSION.
RE‐TIGHTEN JAM NUTS.
NOTE:
ADJUST CABLE SO CABLE‐END
REMAINS HANGING LOOSELY AS SHOWN
Mi6 ASSEMBLY PAGE 34
INSERT LANYARD RING (113)
BETWEEN JAM NUTS (58)