Hoist Fitness Mi6 - Manual (Page 37)

OWNER’S MANUAL
NOTE:
- WRENCH TIGHTEN HARDWARE
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
Mi6 ASSEMBLY PAGE 36
*IMPORTANT*
*WRENCH TIGHTEN ALL PREVIOUSLY HAND TIGHTENED HARDWARE*
AT THIS STEP, TAKE TIME TO ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND
PERPENDICULAR. USE A LEVEL TO CHECK THAT THE GUIDE RODS ARE PERPENDICULAR
IN BOTH DIRECTIONS. IF THEY ARE NOT PERPENDICULAR IN BOTH DIRECTIONS, IT WILL
BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME AND
REIGHTEN BOLTS.
FRAME ASSEMBLY