Vehicle personalization, Memory seat, Vehicle personalization -63 – Hummer 2005 H2 User Manual

Page 139: Memory seat -63

Advertising
background image

Fully open: To open the sunroof completely, press
and hold the rear of the switch until the sunroof
opens completely.

Closed: To close the sunroof, press the front of the
switch until the sunroof reaches the desired position
or until it is fully closed and stops on its own.

Vent: The vent position allows the rear of the sunroof
to be opened and tilted upward. With the sunroof in
the fully closed position, press and hold the front of
the switch until the sunroof reaches the desired vent
position or until it stops moving. To close the sunroof
from the vent position, press and hold the rear of the
switch until the sunroof is fully closed.

Do not to leave the sunroof open for long periods of
time as debris may collect in the tracks.

Sunshade Operation

The sunshade will open automatically when opening
the sunroof.

However, it can manually be pulled shut after the
sunroof is closed. To adjust the sunshade, push it
backward or pull it forward to the desired position. The
sunshade cannot be adjusted further than the current
closed position of the sunroof.

Vehicle Personalization

Memory Seat

If your vehicle has this
feature, the controls for the
memory function are
located on the driver’s door.

These buttons are used to program and recall memory
settings for the driver’s seat and both the driver’s
and passenger’s outside mirrors. The settings for these
features can be saved for up to two drivers.

2-63

Advertising