Using cleaner on fabric – Hummer 2005 H2 User Manual

Page 405

Advertising
background image

Most stains can be removed with club soda water. To
clean, use the following instructions:

1. For liquids: blot with a clean, soft, white cloth. For

solids: remove as much as possible and then
vacuum or brush.

2. Apply club soda water to a clean, soft, white

cloth. Do not over-saturate; the cloth should not
drip water.

3. Clean the entire area. Avoid getting the fabric

too wet.

4. Start cleaning from the seams into the stain to

avoid a ring effect.

5. Continue cleaning, using a clean area of the cloth

each time it becomes soiled.

6. When the stain is removed, blot the cleaned area

with another dry, clean, soft, white cloth.

Using Cleaner on Fabric

1. First, try the cleaner in an inconspicuous area to

make sure the cleaner does not affect the color of
the fabric.

2. For liquids: blot with a clean, soft, white cloth. For

solids: remove as much as possible and then
vacuum or brush.

3. Spray a small amount of the cleaner onto a clean

soft, white, cloth. Do not apply spray directly to
the fabric.

4. Start cleaning from the seams into the stain to

avoid a ring effect.

5. Continue cleaning, using a clean area of the cloth

each time it becomes soiled.

6. When the stain is removed, blot the cleaned area

with another dry, clean, soft, white cloth.

7. If the cleaner leaves a ring effect, follow up with

the club soda water instructions given earlier in
this section.

5-93

Advertising