Hummer 2005 H2 - Manual (Page 398)

12. Tighten the nuts firmly
in a crisscross
sequence as shown by
turning the ratchet
clockwise, with the UP
mark facing you.
13. When you install the wheel and tire, you must
also reinstall the center cap. Place the cap on
the wheel and tap it into place until it sits flush
with the wheel.
Storing a Flat or Spare Tire
and Tools
Inside-Mounted Tire
Use the art and text following to help you store the
spare or flat tire back into its proper spot when you
are done.
Store the flat or spare tire back inside the vehicle on the
spare tire mount.
A. Spare or Flat Tire
B. Receiver Extension
(If Equipped)
C. Tire Retainer Plate
D. Nut
E. Wheel Blocks
5-86