IBASE SMARC-EVK1 - Manual (Page 7)

7
7 IBASE Technology Inc.
1. Introduction
1.1. IBASE SMARC Starter Kit
SMARC (‘Smart Mobility ARChitecture’) is a specification published by the
Standardization Group for Embedded Technologies e.V. (SGET) for
Computer-on-Modules (COMs). SMARC Computer-on-Modules are specifically designed
for the development of compact low-power systems. Generally, SMARC modules are
based on ARM processors and other low-power SoC architectures.
Measuring 82mm x 50mm, the Ibase RM-F600-SMC SMARC module is integrated
with an i.MX6 Dual Lite 1Ghz extended consumer-grade CPU that supports 2D/3D
graphic acceleration and 1080p encode/ decode under Linux/Android BSP to allow easy
OS upgrade and short time to market.
Measuring 170mm x 170mm (Mini ITX form factor), the Ibase RP-100-SMC carrier
board is compatible with 82mm x 50mm - 82mm x 80mm standard SMARC form factors.
Engineers can choose the required embedded IOs to verify developed software
application under specified Operation System. Besides setting the default HDMI output
with O.S preload in RM-F600-SMC eMMC, IBASE can optionally provide driver-ready 3G
module, WIFI module, touch panel, cable kit, power adaptor and accessories to speed
up the evaluation cycle.