Pci express configuration, Usb configuration – IBASE FWA8208 User Manual

Page 30

Advertising
background image

29

Wake on LAN
Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be disabled if ME is on at Sx state.)

SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.

PCI Express Configuration

Main Advanced

Chipset

Boot

Security

Save & Exit

PCI Express Configuration

→ ←

Select Screen

↑↓

Select Item

Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit

PCI Express Clock Gating

[Enabled]

DMI Link ASPM Control

[Enabled]

DMI Link Extended Synch Control

[Disabled]

PCIe-USB Glitch W/A

[Disabled]

Subtractive Decode

[Disabled]

PCIE Port 1 is assign

► PCI Express Root Port 2

► PCI Express Root Port 3

► PCI Express Root Port 4

► PCI Express Root Port 5

► PCI Express Root Port 6

► PCI Express Root Port 7

► PCI Express Root Port 8



PCI Express Clock Gating
Enable or disable PCI Express Clock Gating for each root port.

DMI Link ASPM Control
The control of Active State Power Management on both NB side and SB side of the DMI link.

PCIe-USB Glitch W/A
PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG port.

USB Configuration

Main Advanced

Chipset

Boot

Security

Save & Exit

USB Configuration

→ ←

Select Screen

↑↓

Select Item

Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit

XHCI Pre-Boot Driver

[Disabled]

xHCI Mode

[Auto]

HS Port #1 Switchable

[Enabled]

HS Port #2 Switchable

[Enabled]

HS Port #3 Switchable

[Enabled]

HS Port #4 Switchable

[Enabled]

xHCI Streams

[Enabled]

EHCI1

[Enabled]

EHCI2

[Enabled]

USB Ports Per-Port Disable Control

[Disabled]

HS Port #1/2/3/4 Switchable
Allows for HS port switching between xHCI and EHCI. If disabled, port is routed to EHCI. If HS port is routed to xHCI,
the corresponding SS port is enabled.

xHCI Streams
Enable or disable xHCI Maximum Primary Stream Array Size.

EHCI1/2
Control the USAB EHCI (USB 2.0) functions. One EHCI controller must always be enabled.

USB Ports Per-Port Disable Control
Control each of the USB ports (0~13) disabling.

Advertising