Insinger Master RC - Manual (Page 11)

MASTER/CLIPPER FLIGHT MACHINES
INTRODUCTION
Purpose
The purpose of this technical manual is to provide
installation, operation, cleaning and maintenance
directions.
A section is provided for replacement parts.
Scope
This manual contains all pertinent information to as-
sist in the proper installation, operation, cleaning,
maintenance, and parts ordering for Insinger Flight
machines including the Clipper and Master.
The installation instructions are intended for
qualified equipment installers. The operation and
cleaning instructions are intended for the daily
users of the equipment. The maintenance and
parts sections are intended for qualified service
and/or maintenance technicians. Replacement parts
may be ordered directly from our factory or from
your local Insinger Authorized Service Agency.
You can speak to the Insinger Technical Services
Department, 800/344-4802, or e-mail us at
[email protected]. When calling for
warranty information or replacement parts please
provide the model and serial number of your
Insinger Equipment. These important numbers
should be noted in this manual on the spaces
provided on the opening page.
Surefire™ Start-up & Check-out Program
Insinger is proud to offer our exclusive Surefire™
Start-up & Check-out Program to our commercial
customers. This service is included in the purchase
price of your new Insinger dishwasher. We will
provide an authorized factory service technician for
the initial start-up of your new Insinger dishwasher
to ensure it is running at optimum levels from the
very first pass. Please call the factory or your local
Insinger Sales Representative to schedule this
service.
PART 1 TECHNICAL INFORMATION
NSF 3-2003 requirements for detergent
and chemical sanitizer dispensers.
This machine must be operated with an automatic
detergent dispenser and, if applicable, an automatic
chemical sanitizer feeder, including a visual means
to verify that detergents and sanitizers are delivered
or a visual or audible alarm to signal if detergents
and sanitizers are not available for delivery to the
respective washing and sanitizing systems. Please
see instructions for electrical and plumbing connec-
tions located in this manual and in the feeder equip-
ment manual.
CAUTION:
Indicates potential equipment damage.
þ
NOTE:
Indicates helpful operating hints or tips.
Definitions
Throughout this guide you will find the following
terms: WARNING, CAUTION, & NOTE.
WARNING indicates potential physical danger.
CAUTION indicates potential equipment damage.
NOTE indicates helpful operating hints or tips.
You will visually be able to identify each as
shown below:
WARNING:
Indicates potential physical danger.
!
Clipper/Master RC DOC FLT-CLPMST 1.0 04 www.insingermachine.com 800-344-4802
9