Insinger Master RC - Manual (Page 15)

HVAC
Ventilation system should be sized to provide
adequate ventilation per machine specs. Refer to
spec sheet.
Stainless steel, watertight ducting should be
connected to the vent cowls on each end of the
machine or an overhead venting system should be
installed.
Chemicals
Upon completed installation of the dishwasher
contact a local detergent/chemical supplier for the
correct chemicals for your area.
Electrical connection points for the detergent
dispenser and rinse injector are located inside the
control panel. Refer to the wiring diagram for this
machine for the proper connection points. The
detergent density probe should be located in a
convenient place in the wash tank.
PART 2 INSTALLATION INSTRUCTIONS
Clipper/Master RC DOC FLT-CLPMST 1.0 04 www.insingermachine.com 800-344-4802
13