IPUX ICS2300 Advanced Installation Guide - Manual (Page 42)

- 41 -
- Light Frequency: Select the proper frequency according
to the camera’s location to reduce the flicker: 50Hz, 60Hz
or Outdoor.
TIP When the camera is installed indoors, the Light Frequency
option can be set normally (50Hz or 60Hz). However, the
image of live video might be over exposure if the camera is
focusing on the object outdoors. When this happens, you
can set the option as Outdoor (even when the camera is
installed indoors) to fix over exposure issue.
4.6.2 Video & Audio >> Video
 H.264
- Video Resolution: Select the desired video resolution
from the four formats: SXGA, VGA, QVGA and QQVGA.
The higher setting (VGA) obtains better video quality while
it uses more resource within your network.
- Video Quality: Select the desired image quality from five
levels: Lowest, Low, Medium, High, and Highest.
- Frame Rate: Select a proper setting depending on your
network status.
 MPEG4
- Video Resolution: Select the desired video resolution
from the three formats: VGA, QVGA and QQVGA. The
higher setting (VGA) obtains better video quality while it
uses more resource within your network.
- Video Quality: Select the desired image quality from five
levels: Lowest, Low, Medium, High, and Highest.
- Frame Rate: Select a proper setting depending on your
network status.
 MJPEG
- Video Resolution: Select the desired video resolution
from the four formats: SXGA, VGA, QVGA and QQVGA.