IPUX ICS2300 Advanced Installation Guide - Manual (Page 55)

- 54 -
4.9.5 Event Configuration >> GPIO Trigger
 Select
the Enable Trigger in 1 option to enable the GPIO
trigger function of the camera, so that you can set Trigger
Out function or send captured images within the detecting
area to the FTP server, email receiver, Network Storage
server, or the connected USB device. You have to configure
corresponding settings, such as FTP server and email server,
to enable this feature.
- Schedule Profile: Select a schedule profile from the pull-
down list.
- Action: Set the trigger function to enable the White LED
light warning, or select the destination that the captured
images will be sent to: Trigger Out, Record to USB,
Record to Network Storage, Send Email, FTP Upload,
Instant Message, or Upload Image to Picasa.