JLCooper PPS-2 Remote for Mac OS X - Manual (Page 13)

You can select an entry by clicking on it. You can select a contiguous range by clicking
on the first item in the range and SHIFT-clicking on the last item in the range.
Discontiguous items can be selected by COMMAND-clicking.
Once one or more items have been selected, the Remove Selected Items from Batch
List button (“-”) will appear. Clicking on it will delete the selected items. They may also
be deleted by hitting the BACKSPACE key. Deleting is undoable and redoable.
Batch Stripe Settings
When the Use Batch Striping box is left unchecked, then striping will be based on the
current Start and Stop times. If it is checked, then striping will be controlled by the Batch
Stripe List. The Use Batch Striping box will not be selectable unless there is at least
one entry in the Batch Striping List.
The default setting is to stripe all the items in the list, but if any of them are selected,
you can choose to only stripe the selected items.
All changes to the Batch Stripe Settings are undoable and redoable.
! PPS-2 Remote for Mac OS X™
! 11