Kanguru Defender User Manual
Page 14
14
2.3.1 resetting from the Login screen
In the event you have forgotten your password, you can use the Reset to Factory Default function to reset
your password. This will reset the device to the factory settings, erasing all saved passwords and data
residing on the device’s secured partition.
caution! Using the Reset to factory default function will format and wipe all data off the device! All
data on the device will be lost! Please use with caution.
To reset your Defender to the factory default:
Start KDM.
1.
When the login screen appears, click on the
2.
reset to factory default button.
When you are prompted to confirm the reset, click on the
3.
Yes button.
When your password and data stored on the secured partition have been erased, the following
4.
message will appear. Click on the oK button to complete the reset.
The next time you run KDM, you will have to complete the Setup Wizard again before you are able to
access the secured partition. Please see
section 2.2 The Setup Wizard, p.10
for instructions on completing
the Setup Wizard.
Resetting from the Login Screen