TTI TCB-R2000 - Manual (Page 10)

TCB-R2000 English 10
Transceiver System Controls and Functions Transceiver System Controls and Functions
Press this button for about  seconds to turn on or turn off
your transceiver.
1) Power ON/OFF Button
Manual Adjustment : Turn this knob counter-clockwise until
you hear the background noise and then turn the knob a little
clockwise until the noise disappears. In this way, you get the
best receive sensitivity.
DSS: In FM mode turn the knob counter-clockwise until
it ends. The squelch level of your transceiver is dynamically
adjusted.
2) Squelch&DSS Knob
Most of the operational information is displayed. Please see LCD
Display section of this manual for the details of information.
3) LCD Display
BUTTON
POWER ON/OFF
SQUELCH & DSS KNOB
LCD DISPLAY
Volume Adjustment : The more you turn this knob clockwise,
the bigger the audio sound grows. This volume knob generates
a virtual volume on the LCD. The virtual volume moves in co-
relation with this volume knob.
4) Volume&Menu Selection Knob
KNOB
VOLUME & MENU
Menu Selection and Setting : The menu mode allows you to set-up and edit the
selectable functions. To access the MENU mode, press and hold this button, and after-
wards each press of the MENU button steps the transceiver sequentially through the
different functions. The LCD display indicates the current function. The present setting
and associated icon, if there is, display.
Use this knob and turn clockwise or counter-clockwise to change the setting. You may
use the channel up/down button instead. Press the PTT or MENU button or wait for
about 10 seconds to store your selection. If you do not press any button or knob for
about 10 seconds, your transceiver will return to the stand-by mode automatically.
Please refer to the MENU ITEM section of this manual for the details of menu items.
Momentarily press this button to move down the channel.
The channel changes one by one. Press and hold this button
to quickly scroll down the channel.
5) Channel Down Button
CHANNEL DOWN
Momentarily press this button to move up the channel.
The channel changes one by one. Press and hold this button to
quickly scroll up the channel.
6) Channel Up Button CHANNEL UP BUTTON
Scan : Press this button momentarily to start scanning up-
ward to catch any channels that are occupied by others. To
activate/deactivate the channel scan, press the Scan button
briefly. The Scan icon (TAG) will appear when the channel
scan is active. Scanning will only stop when you deactivate
the scan function.
7) Scan & Scan Memory Button
SCAN&SCAN MEMORY
TCBR2000 man_reized.indd 10 2011.3.14 5:34:21 PM