TTI TCB-R2000 - Manual (Page 15)

TCB-R2000 English 15
LCD DISPLAY MENU MODE
Speaker Mute
Dynamic Squelch System
- Professional Menu Mode
Pressing and holding the up button of the Remote LCD unit, turn on the transceiver.
The LCD tells that you have entered the professional menu mode.
The first ones are the same normal menu mode items and the professional menu
mode items follow.
SQT-TONE
STATE : (ON,OFF)
ROGER
STATE : (ON,OFF)
BACK LIGHT DIMMER
(High,Low,Off)
QUICK
CH-STEP ; (,5,10,15)
EXT SPEAKER
STATE : (AUTO,OFF)
ID EDIT
(XXX XXX)
SCAN RECEIVER
TIME:(01-99,CONT.)
SCAN DELAY
TIME : (01-99.OFF)
CALL
SELECT: (OFF,1-5)
BEEP
STATE : (ON,OFF)
Reduction of noisy squelch
tail.
Both of the transmitting ra-
dio and the receiving radio
should be in the same selec-
tion to properly work.
Roger beep tone on or off
Back light dimmer selec-
tion
Step selection for quick
channel up/down
Controlling the external
speaker upon its connection
ID writing: Use the volume
knob to select the alphabet
or number and use the chan-
nel up/down button to move
to the next letter.
Timer selection during scan-
ning and upon effective
signal.
Timer selection after effec-
tive signal has disappeared.
Call(page) selection.
The call tone can be heard
from the receiving radios
only.
Key beep tone on or off
ON,OFF
,5,10,15 Channels
AUTO,OFF
Max.1 characters to
be written.
01-99 sec, CONT
(Continuously staying
while there is signal)
01-99 sec, OFF
(Immediate Scanning
Resumed)
01-05, OFF
ON,OFF
ON,OFF
LOW,HIGH.OFF
Display Functions Settings
MENU
MENU
MENU
MENU
MENU
MENU
MENU
MENU
MENU
MENU
TCBR2000 man_reized.indd 15 2011.3.14 5:34:23 PM