TTI TCB-R2000 - Manual (Page 8)

TCB-R2000 English 8
Insert the microphone into this jack. Use the guide for easy
connection.
1) Microphone Jack
Transceiver System Controls and Functions
The front speaker makes the audio always loud enough even
when the transceiver is located in the audio compartment
(center fascia) or in some places difficult to be found.
2) Front Speaker
MICROPHONE JACK
FRONT SPEAKER
Insert the handsfree microphone into this jack.
3) Microphone Jack(Handsfree)
Connect an AUX connector of your audio equipment such as
your MP player into this jack.
4) AUX Jack
Install the remote control unit connector into this jack.
5) Remote Control Unit Jack
Install the remote LCD unit connector into this jack.
6) Remote LCD Unit Jack
- Transceiver Rear Panel
Connect the power supply cable to this port.
NOTE : This transceiver works properly at 1.V DC input.
And one high voltage protection circuit is installed to pro-
tect this transceiver
from 4V DC connection.
7) Power 12V/24 DC
Install the Remote LCD unit connector into this jack.
8) Remote LCD Unit Jack
- Transceiver Front Panel
Microphone Jack
AUX JACK
CONTROL UNIT
LCD UNIT
POWER 12/24 V DC
LCD UNIT
Transceiver System Controls and Functions
Volume&Menu
Selection Knob
TCBR2000 man_reized.indd 8 2011.3.14 5:34:20 PM