La Crosse Technology C86234 - Manual (Page 16)

DEFAULT W EATHER ALARM VALUES:
Pressure
Low 28.35 inHg Wind gust High 62.0mph
High 30.71 inHg Wind Direction North
Temperature (In or
Out)
Low 32
°F Rainfall in 24
hours High 1.96 in
High 104
°F
Relative Humidity
(In or Out) Low 45%
High 70%
PRESSURE ALARMS:
1. In the normal display mode, press the ALARM button once.
The high-pressure alarm display will show.
2. Press and hold the SET button for about 2 seconds. The
pressure digit will flash.
3. Press the
▲/DATE button or ▼/RAIN button to set the high-
pressure alarm value. Hold the arrow button in to change the
value faster.
4. Press the ALARM button to confirm the setting. The digit will
stop flashing.
5. Press the SET button to switch the alarm on or off. The ((( ))) icon indicates the alarm is
switched on.
6. Press the ALARM button once. The Low Pressure alarm
display will show.
7. Press and hold the SET button for about 2 seconds. The
pressure digit will flash.
8. Press the
▲/DATE button or ▼/RAIN button to set the low-
pressure alarm value. Hold the arrow button in to change the
value faster.
9. Press the ALARM button to confirm the setting. The digit will
stop flashing.
10. Press the SET button to switch the alarm on or off. The ((( )))
icon indicates the alarm is switched on.
11. Press the ALARM button to move to the indoor temperature alarms.
INDOOR TEMPERATURE ALARMS:
1. The high indoor temperature alarm display will show.
2. Press and hold the SET button for about 2 seconds. The
temperature digit will flash.
3. Press the
▲/DATE button or ▼/RAIN button to set the high
indoor temperature alarm value. Hold the button in to change
the value faster.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.
5. Press the SET button to switch the alarm on or off. The (((
))) icon indicates that the
alarm is switched on.
6. Press the ALARM button once. The low outdoor temperature alarm display will show.
P a g e | 16